Valrenna Suede Leather Effect Set

Valrenna Suede Effect - Set

This is a water-based interior paint characterized by its extraordinary softness to the touch and a texture reminiscent of goat leather.

Valrenna contains specially selected resins and pigments that allow for the creation of decorative effects similar to the appearance of soft fabrics, available in exceptionally elegant color shades.

The product can be applied to various surfaces such as cement, plaster, stucco, drywall, wood, and iron, provided the surface is properly prepared.

Properties of Valrenna Textured Paint:

• Exceptionally subtle and delicate decorative coating.
• A high-quality product that resembles the delicate texture of suede, velvet, linen fabric, or corduroy in both effect and touch.
• Gently washable paint coating, suitable for surfaces such as plaster, drywall,
• concrete, moldings, and wood.
• Its application personalizes and "warms up" the rooms in which it is used.
• For interior use only.

Prefer watching a video instead of reading?

Scroll to the end of the description to find a video tutorial on how to apply this paint.

Application Methods for Valrenna:

• Goat Leather Effect: Apply with a brush in various directions, then smooth with a dry brush.
• Shantung Effect: Use a short-nap roller and a brush to create vertical patterns.
• Linen Effect: Use a short-nap roller and a brush to create intersecting lines.

Surface Preparation for Valrenna:

• The surface intended for Primer 400 application should be clean, dry, and free from dust, grease, and other contaminants.
• It should also be primed and prepared similarly to decorative topcoat painting.
• This process enhances the effectiveness of Primer 400.
• Before painting, the primer should be diluted with water in a ratio of 10%-30% and mixed thoroughly to achieve a uniform consistency.

Goat/Suede Leather Effect:

• Step I - Surface Preparation and Primer Application

First, apply one or two uniform layers of Primer 400 to achieve even coverage in the selected color. A 5–10 mm nap roller is best suited for application. Allow the primer to dry for 12 hours at 20°C.

• Step II - Applying Valrenna Paint

Before application, dilute the paint with water in a ratio of 20%-30% and mix thoroughly. The recommended brush for application is PV76. Apply the paint in short, crisscross strokes up to 15 cm, alternating directions. After 5–10 minutes, go over the painted surface with a clean brush in the same motion to remove any streaks and achieve a matte finish.

• Step III - Second Coat of Valrenna Paint

After 5–6 hours from the first coat, repeat the application process as described in Step II to achieve a more pronounced and uniform suede effect.

Linen Effect:

• Step I - Surface Preparation and Primer Application

This step is identical to the Goat Leather Effect preparation.

• Step II - Applying Valrenna Paint

Before application, dilute the paint with water in a ratio of 20%-30% and mix thoroughly. For the linen technique, use a 5–10 mm nap roller and a stiff-bristle brush. Apply the first coat with a roller in a vertical direction. While the paint is still wet, use the brush to create a brushed linen texture following the roller's vertical direction.

• Step III - Second Coat of Paint

After 5–6 hours, apply the second coat with a roller in the opposite direction (horizontal). While the paint is still wet, use the brush again to refine the linen texture.

Shantung Effect:

• Step I - Surface Preparation and Primer Application

This step is identical to the previous effects.

• Step II - Applying Valrenna Paint

Before application, dilute VALRENNA paint with water in a ratio of 20%-30% and mix thoroughly. For the Shantung technique, use a 5–10 mm nap roller and a decorative brush. Apply the first coat with a roller in a uniform direction – vertical or horizontal. While the paint is still wet, use the brush to create the distinctive Shantung fabric pattern.

• Step III - Second Coat of Valrenna Paint

After waiting 5–6 hours, repeat the process described in Step II. Applying the second coat in the same manner will achieve the full and consistent decorative effect characteristic of Shantung fabric.

Below you will find a video explaining 3 methods of applying Valrenna paint