Concrete effect plaster Meteore 10 Valpaint
Concrete effect plaster Meteore 10 Valpaint in 4 l (4-6 m2) or 12 l (12-18 m2) buckets. Ready, tinted to your colour, one coat with a trowel. Quantity calculator on the page.
Description
Concrete effect plaster Meteore 10 Valpaint sold by the bucket: 4 l covers 4-6 m², 12 l covers 12-18 m², you apply it with a trowel in a single coat and receive it ready and already tinted to your colour.
This option is for people who already have the primer and sealer or are adding plaster to an earlier order. Choose the size and the colour from the sample book above the price, and work out how many buckets your wall needs with the calculator on this page.
Meteore 10 in kits and in effects
If you are starting from scratch, a ready kit with primer and sealer is the easier choice - the same material also comes in the Moon and Vintage effects, and the prices on the tiles update automatically.
Pick the shade from the sample book, not from the screen - you can borrow the Meteore 10 sample book from us and hold it against the wall in your own light. Check the number of buckets with the calculator on this page, and for a larger area or an unusual substrate give us a call - we will tell you whether 12 l is enough or whether to add a 4 l reserve.
Have questions or want to place an order?
Message us on WhatsApp or by email and we will work out the quantity of material and prepare your order.
What is Meteore 10 plaster?
Meteore 10 is a Valpaint decorative plaster that, applied with a trowel in one coat, gives the look of concrete - a ready, tinted material with no water to add and no tinting on site. In this listing you buy the bucket alone, in 4 l or 12 l, in a colour from the sample book.
The good aggregate in the material lets it spread evenly and gives a clear concrete pattern. The system is closed with a wax-based sealer, after which the surface does not absorb water - which is why this plaster goes into kitchens, bathrooms, hallways, offices and onto building exteriors.
How to match the Meteore 10 size to your wall
| Feature | What it means for you |
|---|---|
| 4 l bucket | Covers 4-6 m² - a single wall behind the bed, a section in the kitchen, or a reserve when the 12 l falls a few metres short. |
| 12 l bucket | Covers 12-18 m² - a whole living-room wall or two smaller ones; for larger areas you combine buckets from one colour batch. |
| One coat | The whole bucket goes into a single application, so the coverage per pack is real square metres, not a figure to divide by coats. |
| No dilution or tinting on site | Open and apply - the colour from the sample book is already in the bucket, so when buying more give the same shade number. |
| Needs primer and sealer | The bucket alone is the middle of the system: Primer 1200 underneath, Finish V18 on top - both are in Related products. |
When to buy the bucket alone and when the kit
- You already have Primer 1200 and Finish V18 from a previous decoration - you only add the plaster.
- You ran out of material mid-job - you order 4 l in the same shade.
- You are covering more than 15 m² - you build the quantity from 12 l and 4 l buckets using the calculator.
- You are starting from scratch - choose a kit from the tiles above instead, as it has the primer and sealer sized to the area.
You will find more plasters with different textures in the Decorative plasters category.
The Meteore 10 technical data sheet is in the files section at the bottom of this page. In Related products you will find Primer 1200, Finish V18 sealer, the C100 Over glaze and the ready kits based on this material: concrete effect, Cemento Levigato, Compatto, Cemento Rigato, Cemento Slim, Cemento Large and Vintage.
Questions about Meteore 10 plaster by the bucket
How many buckets of Meteore 10 do I need for 20 m²?
A 12 l bucket covers 12-18 m² and a 4 l bucket 4-6 m², so for 20 m² take 12 l and 4 l together, and on an absorbent or uneven substrate add a second 4 l. Work out the exact number of buckets for your area with the calculator on this page.
What coverage does one bucket of Meteore 10 give?
The manufacturer states 4-6 m² from the 4 l pack and 12-18 m² from the 12 l pack in a single coat applied with a trowel. A smooth, even wall brings you closer to the upper figure, a rough and absorbent one to the lower.
What else do I need to buy with the plaster alone?
Under the plaster you need Primer 1200, and on top Finish V18 sealer - without the sealer the surface will not be protected against water. Both products are in Related products, and if you have neither, the kit from the tiles above works out cheaper and simpler.
Can I apply Meteore 10 with no experience?
The material is ready and goes on in one coat, so the application itself is not complicated - the concrete pattern, however, depends on how you move the trowel. Practise on a small section from a 4 l bucket before you start a large wall, or hand the job to a decorator with trowel experience.
Which rooms is this plaster suitable for?
Once sealed, the surface does not absorb water, so Meteore 10 works in kitchens, bathrooms and hallways, as well as offices and commercial premises where walls get heavy use. It can be used inside and outside buildings - for a facade, write to us before ordering so we can select the protection.
Will an extra bucket come in the same colour?
Yes, if you give the same shade number from the Meteore 10 sample book - we tint it before shipping to the same reference. Tinted colours are prepared to order, so they cannot be returned; compare the shade on the sample book, not on the screen, before you buy.
Does Meteore 10 need diluting or mixing with anything?
No - the product is ready to apply straight from the bucket, with no water to add and no pigments to mix in on site. You apply it with a trowel in one coat onto a wall primed with Primer 1200.
We tint the colour to your order. Shades prepared to the sample book are made to your individual specification and, under Polish consumer law (art. 38.1.3 of the Consumer Rights Act), cannot be returned. Check the shade on the sample book and work out the number of buckets with the calculator on this page before you order.
Photos and colour tiles are for guidance only - the colour on screen is not the colour on the wall.
Technical Data
| In this listing you buy | the Meteore 10 plaster bucket alone, in your chosen colour and size |
| Sizes | 4 l and 12 l |
| Coverage per 4 l pack | 4-6 m2 |
| Coverage per 12 l pack | 12-18 m2 |
| Recommended number of coats | 1 |
| Application tool | trowel |
| Dilution | no, ready-to-use product |
| Colours | Meteore 10 sample book, tinted before shipping |
| To complete the system you need | Primer 1200 undercoat and Finish V18 sealer (Related products) |
| Ready kits with this plaster | in Related products and on the tiles in the description |
Be the first to post a review for this product
